Virtual Ptz And Full Image Recording; Preparing The Virtual Ptz Function - Mobotix Q25M Manual

128
/156
Greater ease of use
through a joystick
Q25M Camera Manual: Operating the Camera
3.3

Virtual PTZ and Full Image Recording

3.3.1 Preparing the Virtual PTZ Function

The virtual PTZ function allows you to use a mouse or joystick to continuously zoom in on
images from the selected video source and "virtually" move the enlarged image section
within the entire image sensor area.
Operation Using the Mouse and Scroll Wheel
The vPTZ function of the Q25M can be controlled in the browser using the mouse. This
position becomes the new image center by clicking on any position on the image displayed
on the monitor. The image moves accordingly and the image distortion is automatically
corrected. The scroll wheel can be used to control the zoom function. This functionality
is disabled in the default settings of the camera and must therefore first be activated. To
do this, go to Setup Menu > vPTZ Settings , disable Lock Mouse Wheel Zoom, click on
Set and then on Close to save your settings. You can now use the scroll wheel to zoom
+ (roll upwards) or zoom – (roll downwards).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
vPTZ
www.mobotix.com • sales@mobotix.com
vPTZ