Installation; Checking The Rail Kit Accessories; Tools Required - Avaya 9130 Installation And Operator's Manual

Installation

The Avaya 9130 rackmount cabinet comes with all of the hardware
required for installation in a standard EIA or JIS seismic rackmount
configuration with square and round mounting holes. The rail assemblies
adjust to mount in 48-cm (19-inch) racks with front to rear rail distances
from 61 to 76 cm (24 to 30 inches) deep.

Checking the Rail Kit Accessories

Verify that the following rail kit items are included for each cabinet:
S
S
S
S

Tools Required

To assemble the components, the following tools may be needed:
S
S
S
Avaya 9130 1000–3000 VA UPS Site Preparation, Installation and Operator's Manual
Left rail assembly:
- Left rail
- Rear rail
×
- (3) M4 8 pan-head screws
Right rail assembly:
- Right rail
- Rear rail
×
- (3) M4 8 pan-head screws
Rail hardware kit:
×
- (10) M6 16 pan-head screws
- (10) M6 cage nuts
- (2) rear stop brackets
×
- (2) M3 8 pan-head screws
Mounting bracket kit:
- (2) mounting brackets
×
- (8) M4 8 flat-head screws
Medium flat-bladed screwdriver
Phillips #2 screwdriver
®
7 and 8 mm wrench or socket
INSTALLATION
S 19
164201765 Rev 1