Table of Contents
Advertisement
C H A P T E R 3
I
NSTALLATION
The following sections describe UPS storage requirements and the
installation and startup of the UPS. In addition, an Extended Battery
Cabinet may be configured. The installation of this product and
connection to the battery modules is covered by the EBC installation
manual.
Unpacking and Inspection
Carefully unpack the UPS and battery modules, making sure to retain
the packaging materials. Examine each unit carefully for any signs of
damage and immediately notify your service representative if damage is
present.
UPS and Battery Module Storage
If you plan to store the UPS or battery modules prior to use, store them
in a cool, dry environment. Storage temperature should not exceed
35
energize the power processing unit and battery module for
approximately 8 hours every 90 days in order to maintain battery
charge.
Whenever the units are not energized, verify the circuit breaker on all
battery modules is returned to the OFF (O) position (see Figure 4 on
page 28).
Important Installation Notes – Read Before Installing the UPS
UPS applications requiring a serial interface or standard LAN interface
may connect directly to the 25-pin UPS alarm interface. PBX systems
such as the DEFINITY R Communications System and processor-based
applications such as Call Center, Conversant, or Voice Processing that
use a Remote Management Board require an isolated contact-closure
interface that is provided by a special UPS Alarm Interface Adapter
(PEC 24433).
Avaya Model 6000 UPS Operator's Manual
C (95
F ) in order to preserve battery life. For longer term storage,
°
°
167-405-115 Issue 5 Uncontrolled Copy
S
23
Advertisement
Table of Contents
Troubleshooting
