Changing The Language; Display Functions - Avaya 9130 Installation And Operator's Manual

OPERATION
Table 1 shows the indicator status and description.
Table 1. Indicator Descriptions
Indicator Status
On
Green Flashing
On
Flashing
Yellow
On
Yellow
On
Red

Changing the Language

Press and hold the first button on the left for approximately three
seconds to select the language menu. This action is possible from any
LCD menu screen.

Display Functions

As the default or after 15 minutes of inactivity, the LCD displays the
start screen.
The backlit LCD automatically dims after 15 minutes of inactivity. Press
any button to restore the screen.
Press any button to activate the menu options. Use the two middle
buttons ( and ) to scroll through the menu structure. Press the Enter
(
to the previous menu.
34
Avaya 9130 1000–3000 VA UPS Site Preparation, Installation and Operator's Manual
Description
The UPS is operating normally.
A new information message is active.
The UPS is in Battery mode.
The battery voltage is below the warning level.
The UPS is in Bypass mode.
The UPS is operating normally on bypass during High Efficiency operation.
The UPS has an active alarm or fault. See "Troubleshooting" on page 79 for
additional information.
) button to select an option. Press the
ESC
button to cancel or return
S
164201765 Rev 1