Unpacking The Cabinet; Checking The Accessory Kit - Avaya 9130 Installation And Operator's Manual

INSTALLATION

Unpacking the Cabinet

S
S
Use care when moving and opening the carton. Leave the components
packaged until ready to install.
To unpack the cabinet and accessories:
1.
2.
3.
Place the cabinet in a protected area that has adequate airflow and is
free of humidity, flammable gas, and corrosion.

Checking the Accessory Kit

Verify that the following additional items are included with the UPS:
S
S
S
S
S
If you ordered an optional Extended Battery Module (EBM), verify that
the following additional item is included with the EBM:
S
NOTE Discard the EBM user's guide if you are installing the EBM with a new UPS at the
same time. Use the UPS user's guide to install both the UPS and the EBM.
18
Avaya 9130 1000–3000 VA UPS Site Preparation, Installation and Operator's Manual
Unpacking the cabinet in a low-temperature environment may cause condensation to
occur in and on the cabinet. Do not install the cabinet until the inside and outside of the
cabinet are absolutely dry (hazard of electric shock).
The cabinet is heavy (see page 70). Use caution to unpack and move the cabinet.
Open the outer carton and remove the accessories packaged with
the cabinet.
Carefully lift the cabinet out of the outer carton.
Discard or recycle the packaging in a responsible manner, or store it
for future use.
UPS user's guide
Quick start instructions
Software Suite CD
USB cable
Power cord (for models without an attached power cord)
EBM user's guide
C A U T I O N
S
164201765 Rev 1