Connecting The Ebm(S) - Avaya 9130 Installation And Operator's Manual

INSTALLATION

Connecting the EBM(s)

To install the optional EBM(s) for a UPS:
1.
NOTE Use care to protect the LCD control panel and the connected ribbon cable from
damage.
2.
26
Avaya 9130 1000–3000 VA UPS Site Preparation, Installation and Operator's Manual
On the bottom of the UPS right front cover, remove the EBM cable
knockout (see Figure 10).
esc
Knockout for EBM Cable
Figure 10. Removing the EBM Cable Knockout
Remove the front cover of each EBM (see Figure 11).
To remove the cover, remove and retain the two screws on the
right side of the cover. Grasp the sides of the cover and slide the
cover to the left and then away from the cabinet.
S
164201765 Rev 1