Installation; Inspecting The Equipment; Ups Setup - Avaya RS9RM Preparation, Installation And Operator Manual

Chapter 3

Inspecting the Equipment

UPS Setup

Avaya RS9RM 6000 VA Hardwired UPS Site Preparation, Installation and Operator's Manual

Installation

This section explains:
S
Equipment inspection
S
UPS setup and installation
S
Extended Battery Module (EBM) installation
S
Remote emergency power-off (REPO) installation
If any equipment has been damaged during shipment, keep the shipping
cartons and packing materials for the carrier or place of purchase and file
a claim for shipping damage. If you discover damage after acceptance,
file a claim for concealed damage.
NOTE Check the battery recharge date on the shipping carton label. If the date has expired
and the batteries were never recharged, do not use the UPS. Contact your Avaya service
representative.
NOTE Inspect the battery trays for any loose connections. If any damage occurred during
shipment, file a claim for concealed damage.
The Avaya RS9RM UPS is designed for flexible configurations and can
be installed in a rack or as a standalone cabinet.
For rack-mounted installations, follow the instructions with the rail kit
before installing the internal batteries.
For standalone installations, continue to the following section, "Installing
the UPS Internal Batteries," to begin the UPS setup.
S
164201528 Rev C
17