Configuring Battery Settings; Configuring The Ups For Ebms - Avaya 9130 Installation And Operator's Manual

OPERATION

Configuring Battery Settings

Set the UPS for the number of EBMs installed, whether to run automatic
battery tests, and automatic restart configuration.

Configuring the UPS for EBMs

To ensure maximum battery runtime, configure the UPS for the correct
number of EBMs:
1.
2.
3.
4.
46
Avaya 9130 1000–3000 VA UPS Site Preparation, Installation and Operator's Manual
Press any button on the front panel display to activate the menu
options, then select SETTINGS, USER SETTINGS, and NUMBER OF
BATTERY STRINGS.
Use the or buttons to select the number of battery strings
according to your UPS configuration:
All UPS and EBM Cabinets
UPS only (internal batteries)
UPS + 1 EBM
UPS + 2 EBMs
UPS + 3 EBMs
UPS + 4 EBMs
NOTE If 0 is selected, no batteries are connected and all battery-related
alarms are disabled.
NOTE The UPS contains one battery string; each EBM contains two battery
strings.
Press the button to save the setting.
ESC
Press the button until the start screen appears.
Number of Battery Strings
1 (default)
3
5
7
9
S
164201765 Rev 1