Installation; Unpacking And Inspection; Ups And Battery Module Storage; Important Installation Notes - Read Before Installing The Ups - Avaya 1 Series Site Preparation, Installation And Operator's Manual

C H A P T E R 3
I
NSTALLATION
The following sections describe UPS storage requirements and the
installation and startup of the UPS.

Unpacking and Inspection

Carefully unpack the UPS and battery modules, making sure to retain
the packaging materials. Examine each unit carefully for any signs of
damage and immediately notify your service representative if damage is
present.

UPS and Battery Module Storage

If you plan to store the UPS or battery modules prior to use, store them
in a cool, dry environment. Storage temperature should not exceed
35°C (95°F) in order to preserve battery life. For longer term storage,
energize the UPS and battery module for approximately 8 hours every
90 days in order to maintain battery charge.
Whenever the units are not energized, verify the circuit breaker on all
battery modules is returned to the OFF (O) position (see Figure 5 on
page 32).
Important Installation Notes – Read Before Installing the UPS
UPS applications requiring a serial interface or standard LAN interface
may connect directly to the 25-pin UPS alarm interface. PBX systems
such as the DEFINITY R Communications System and processor-based
applications such as Call Center, Conversant, or Voice Processing that
use a Remote Management Board require an isolated contact-closure
interface that is provided by a special UPS Alarm Interface Adapter
(PEC 24433).
Avaya Model 3000 UPS Operator's Manual 167-405-119 Issue 6 Uncontrolled Copy
S
27