User Settings - Avaya 9130 Installation And Operator's Manual

OPERATION

User Settings

The following table displays the options that can be changed by the
user.
Table 3. User Settings
Description
Change Language
User Password
Audible Alarms
Set Date and Time
NOTE Time is a 24-hour clock.
Signal Inputs
Relay Configuration
Serial Port Configuration
Control Commands from Serial Port
Output Voltage
Output Frequency
* See "Configuring Bypass Settings" on page 44.
36
Avaya 9130 1000–3000 VA UPS Site Preparation, Installation and Operator's Manual
Available Settings
[English] [French] [Spanish] [German]
[Russian]
Menus, status, notices, and alarms are in all
supported languages. UPS faults, Event Log
data, and settings are in English only.
[Enabled] [Disabled]
If Enabled is selected, the password is USER.
[Enabled] [Disabled]
Set Year, Month, Day, Hours, Minutes
Date: yyyy/mm/dd
Time: hh:mm
Setup: [Not Used] [Force Bypass]
[Remote Shutdown] [Delayed Shutdown]
[On Generator] [Building Alarm 1]
Active: [High] [Low]
See "Programmable Signal Inputs" on
page 55.
[UPS ok] [On Bypass] [On Battery]
[Battery Low] [Ext. Charger On]
See "Relay Output Contacts" on page 54.
[1200 bps] [2400 bps] [9600 bps]
NOTE USB communication requires 9600 bps.
[Enabled] [Disabled]
[100V] [110V] [120V] [127V] [Autosensing]
[200V] [208V] [220V] [230V] [240V]
[Autosensing]
[50Hz] [60Hz] [Autosensing]
Default Setting
English
Disabled
Enabled
2008/01/01
12:00
RS232-3: Not Used, High
cXSlot Serial: Delayed
Shutdown, High
cXSlot Signal: Remote
Shutdown, Low
Standard: UPS ok
RS232-1: Battery Low
RS232-8: On Battery
cXSlot-K1: On Battery
cXSlot-K2: Battery Low
cXSlot-K3: UPS ok
cXSlot-K4: On Bypass
RS232: 9600 bps
cXSlot: 9600 bps
RS232: Enabled
cXSlot: Enabled
120V (low voltage models)
230V (high voltage models)
Autosensing
S
164201765 Rev 1