Rackmount Setup - Avaya 9130 Installation And Operator's Manual

INSTALLATION

Rackmount Setup

S
S
NOTE Mounting rails are required for each individual cabinet.
To install the rail kit:
1.
20
Avaya 9130 1000–3000 VA UPS Site Preparation, Installation and Operator's Manual
The cabinet is heavy (see page 70). Removing the cabinet from its carton requires a
minimum of two people.
If installing optional EBM(s), install the EBM(s) directly below the UPS so that all wiring
between the cabinets is installed behind the front covers and is inaccessible to users.
Assemble the left and right rails to the rear rails as shown in
Figure 3. Do not tighten the screws.
Adjust each rail size for the depth of your rack.
Rear Rails
Left Rail
Figure 3. Assembling the Rails
C A U T I O N
×
M4 8 Pan-Head
Screws (6 places)
S
164201765 Rev 1
Right Rail