Figure 18: Console Cable Kit (Mng) - Mellanox Technologies Grid Director 4036E Installation Manual


A RJ45 to DB-9 adaptor for RS-232 console connection

Figure 18: Console Cable Kit (Mng)

NOTE: You can connect the serial and Ethernet management ports of a Grid Director
4036E simultaneously. However, you cannot connect the Ethernet ports of the front and
the rear panels simultaneously.

To connect multi-purpose cable of a Grid Director 4036E
1. Connect the DB-9 connector and the RJ45 connector to each extremity of the multipurpose
console cable (Mng).
2. Connect the DB-9 connector to the Grid Director 4036E CLI port.
3. Connect the RJ45 connector to the Ethernet port either on the rear panel or on the front
panel (but not to both).
50
Cabling
Chapter 9