Unpacking; Overview Of Unpacking The 4036E; Package Contents; Unpacking The Grid Director 4036E - Mellanox Technologies Grid Director 4036E Installation Manual

2

Unpacking

2.1

Overview of Unpacking the 4036E

This chapter provides step-by-step instructions for the packing and unpacking the 4036E
Gateway.
2.2

Package Contents

Mellanox delivers the 4036E Gateway in a cardboard box. The gateway comes with one or two
pre-installed hot-swappable power supplies (according to configuration) and one
hot-swappable fan unit.
Additional components include:

Two power cords.

Rail kit (refer to

A multipurpose console cable kit (Mng). Refer to
(on page 14) for details.

Grid Director Getting Started Guide (hard copy).

A product CD containing Grid Director 4036E documentation and software.

Before You Begin

Before unpacking, make sure that the box is sealed and undamaged.

Before beginning the installation of the Grid Director 4036E, verify that the package
contains all the items, as detailed in the Getting Started Guide. For alist of parts delivered
with the product, see

Check for loose parts or any visible damage to the contents. Notify your supplier if you
detected damaged or missing parts.
2.3

Unpacking the Grid Director 4036E

This section details the Grid Director 4036E package contents and provides instructions on
how to unpack the chassis.

To unpack the Grid Director 4036E, perform the following steps:
1. Open the box and check that it contains the items as shown in the following figure.
12
Rail Kit (KIT-00008) (on page 14) for details).
Ordering Options (on page 19).
Multipurpose (Mng) Console Cable Kit
Unpacking