Mellanox Technologies Grid Director 4036E Installation Manual page 24

LED Name Color
Pwr Green
Info Green
Pwr/Fan Green
SM Green
Pwr Green
Info Green
IB physical Green
link
IB logical link Amber
Eth link Green
Amber
10GbE Green
Physical link
10GbE logical Amber
24
Location
Front panel (fan drawer)
Front panel (fan drawer)
Rear panel
Rear panel
Rear panel
Rear panel
Rear panel on each
QSFP port
Rear panel on each
QSFP port
Rear panel RJ45 connector
Rear panel on each
SFP+ port
Rear panel on each
Technical Specifications and Certifications
Status Functionality
ON System power ok
OFF System power problem
I/O LEDs reflect the link, activity and
status of the Ethernet part of the 4036E.
Refer to Ethernet Gateway LED
Indicators (on page 25) for details on the
I/O 10GbE LEDs.
OFF The device does not require attention
BLINK The device requires attention
ON All fans operational, Nominal
temperature,
PSUs OK
OFF All fans are not working or power down
BLINK At least one fan problem or
high temperature, One PSU problem
ON SM is active
OFF SM is not active
BLINK SM is in standby mode
ON System power ok
OFF System power problem
OFF The device does not require attention
BLINK The device requires attention
ON Port physical link is up
OFF Port physical link is down or port is
disconnected
BLINK Errors, Link is not stable
ON Logical link is configured by SM
OFF Logical link is not configured by SM
BLINK traffic on the link
ON Eth link is up
OFF Eth link is down
OFF No eth traffic
BLINK Eth tragic activity
ON Port physical link is up
OFF Port physical link is down or port is
disconnected
BLINK Error (cannot happen)
ON Port physical link is up