Rear Panel Description; Figure 6: Grid Director 4036E Rear Panel; Table 2: Rear Panel Components - Mellanox Technologies Grid Director 4036E Installation Manual

Grid Director 4036E Installation Manual
Item
3.3

Rear Panel Description

This section details the rear panel of a Grid Director 4036E.

Figure 6: Grid Director 4036E Rear Panel

The following table details Grid Director 4036E rear panel components.

Table 2: Rear Panel Components

Item
1 InfiniBand Port
Connector
2 10Gbps Ethernet SFP+
ports
3 RS232 serial interface
4 10/100/1000 Ethernet
port
RJ-45 Connector
5 LEDs (Status
Indicators)
Component No. of
components
Component Qty
34
2
1
1
4
68
4
Two options are available:

Front-to-rear cooling (labeled as "Air-in")

Rear-to-front cooling (labeled as "Air-out")
Description
4X QSFP InfiniBand connectors for passive copper cables, active
copper cables, active optical cables, and connect optical cables.
1GbE/10GbE SFP+ ports
D-sub -9 pin connector (serial interface) for the CLI
Gigabit Ethernet auto-negotiating RJ-45 Connector for
management purposes.
Speed: 1Gbps/100Mbps/10Mbps (& LED). Provides out-of-band
management interface over a local network.
Rear panel LEDs:
Pwr
PS/FAN
Info
SM
I/O Status
Refer to LED Indicators (on page 23) for the list of LEDs and their
descriptions.
InfiniBand Port Indicators. Indicate the physical and logical status
of each InfiniBand port. (2 LEDs per port) 4 10Gb E port
indicators.
10GbE port indicators. Indicate the physical and logical status of
each 10GbE port. (2 LEDs per port)
Description
17