Mellanox Technologies Grid Director 4036E Installation Manual page 37

Grid Director 4036E Installation Manual
12. Secure each power cord with a cable tie wrap so that you can still adjust the length of the
cord if required.
13. Connect the power cords to the switch power supplies (PSU).
14. Push the switch inwards (from the front side of rack) until the long bracket comes together
with the rail.
15. Fasten the long brackets to the rack's vertical rails using two screws per bracket and tighten
them.
16. Mount a short bracket from the inner side of the mounting bar and fasten it using two
8-32x1/4" pan head Philips screws.
37