Led Indicators; Table 7: Power Supply Module Data; Table 8: Grid Director 4036E Led Indications - Mellanox Technologies Grid Director 4036E Installation Manual

Grid Director 4036E Installation Manual

Table 7: Power Supply Module Data

Attribute
Power Supplies
Electrical ratings [V, A, hz]
Power Inlet Type
Power Rating
Power Factor:
Power Supply Efficiency
Leakage current @ 254V
2 power cords, 2-meter long, with a universal plug for PDU (Power Distribution Unit).
5.3

LED Indicators

The following table lists the LED indicators and their functions and descriptions in their
various states.

Table 8: Grid Director 4036E LED Indications

LED Name
PWR
Fan
SM
Specification

Dual redundant power supply slots

1 or 2 hot-swappable power supplies, according to configuration

Power supply with built-in power inlet
Power entries:
100-240Vac, 5.0A, 50/60 Hz, auto-sensing
(ailto:2.52a@115v)/1.32A@230V
C14
Power consumption*:

Maximum: 240W

Numbers relate to copper cables. For optic cables, add 1.5W per port.

Optical cables configuration-320W, max

Copper cables configuration-240W, max (Typical: 106W)
BTU/hour = Watts x 3.413
Each QSFP optical adapter in use adds up to 2.5W max to the above
consumption.
120 Vac/60 Hz/Max Load = 0.99
230 Vac/60 Hz/Max Load = 0.96
83%(115V) / 87%(230V)
2.422 [mA]
Color Location
Green Front panel-
On each PSU
Green Front panel (fan drawer)
Green Front panel (fan drawer)
2.52A@115V
Status Functionality
ON PSU DC OK
OFF PSU DC problem
ON All fans operational, Nominal
temperature
OFF None of the fans are working
BLINK At least one fan problem or
high temperature
ON SM is active
OFF SM is not active
BLINK SM is in standby mode
23