Disassembling And Assembling - Kubota L3200 Workshop Manual

L3200, WSM

[3] DISASSEMBLING AND ASSEMBLING

Brake Case
It is possible to disassemble as shown in the figure below.
(When reassembling)
• Place the brake discs (4) so that the hole (A) of the second disc
should be overlapped 50 % or more.
Brake Cam
1. Remove the nut (1) on the brake cam (6).
2. Remove the brake cam (6) and brake cam lever (4).
(When reassembling)
• Apply grease to the O-ring (5) and take care not to damage them.
• Apply small amount of grease to the journal A to prevent rust
problem that may lead to seizure.
Tightening torque Brake cam mounting nut
(1) Nut
(2) Spring Washer
(3) Plain Washer
5-S8
BRAKES
W1017134
(1) Ball Seat
(2) Ball
(3) Cam Plate
(4) Brake Disc
(5) Plate
(6) Brake Case
(7) Drain Plug
(8) Brake Cam
(9) O-rings
(10) Brake Cam
W1012974
62.8 to 72.5 N·m
6.4 to 7.4 kgf·m
46.3 to 53.5 ft-lbs
(4) Brake Cam Lever
(5) O-rings
(6) Brake Cam
W1017712
KiSC issued 12, 2006 A