Kubota L3200 Workshop Manual page 97

L3200, WSM
Separating Engine from Front Axle Frame
1. Hoist the engine using chains securely attached to the engine lift
points (1).
2. Remove the front axle frame mounting screw.
3. Separate the engine from the front axle frame (2).
(When reassembling)
• Lift the front of the front axle frame using unused bolt holes, and
tighten the front axle mounting screws.
Front axle frame mounting
Tightening torque
screw (M12)
(1) Engine Hook
1-S25
ENGINE
102.9 to 117.6 N·m
10.5 to 12.5 kgf·m
76.0 to 86.8 ft-lbs
(2) Front Axle Frame
W56897412
KiSC issued 12, 2006 A