Position Control Valve - Kubota L3200 Workshop Manual

L3200, WSM

(4) Position Control Valve

Position Control Valve
1. Loosen and remove the position control valve mounting screws.
2. Remove the position control valve (1).
(When reassembling)
• Take care not to damage the O-rings.
Position control valve
Tightening torque
mounting screws
IMPORTANT
• Measure the distance between the spool edge and spool
joint 2 edge before disassembling.
(1) Position Control Valve
8-S19
HYDRAULIC SYSTEM
23.6 to 27.4 N·m
2.4 to 2.8 kgf·m
17.4 to 20.2 ft-lbs
W1024698
(1) Nut 1
(2) Set Screw
(3) Plate 1
(4) Washer
(5) Spring
(6) Spring
(7) Poppet 1
(8) Valve Seat
(9) Valve Body
(10) Sleeve
(11) Backup Ring
(12) Poppet 2
(13) Plug 1
(14) Screw
(15) Spring Holder
(16) Spring
(17) Plate 2
(18) Spring
(19) Poppet 3
(20) Unload Poppet
(21) Spring
(22) Unload Plug
(23) Spool
(24) Plug 2
(25) Nut
(26) Lock Nut
(27) Spool Joint 1
(28) Spool Joint 2
W1016748
KiSC issued 12, 2006 A