Menu Overview
In the OSD menu, the firmware version is displayed in the top border. The active input
settings and output resolution are displayed in the bottom border. The OSD menu contains
nine submenus with various submenu items of adjustable settings or device information.
Use the Menu, Enter, and Navigation buttons to navigate the OSD menu.
To open the OSD menu:
1.
2.
To navigate the OSD menu:
1.
Submenus
Quick Setup
Auto-Image
User Presets
Recall
Picture Controls
Image
Position
Input
Auto-Image
Output
Output
Resolution
Audio
Audio Mute
Advanced
Test Pattern
Communication
Remote Port
Device Info
Temperature
(Read Only)
2.
3.
4.
To adjust a submenu item:
1.
2.
3.
To exit the OSD menu:
Hold the Menu button for 3 seconds to exit the OSD menu.
Connect a display device to an HDMI output connector on a DTP receiver connected
to an IN1604 DTP (see
figure
IN1604 HD (see
figure
2,
I
Press the Menu or Enter button to open the OSD menu.
Press the Up or Down button to navigate the nine submenus. The following table shows
the nine submenus and their respective submenu items.
Input Format
EDID
Save
Clear
Image Size
Brightness/
Contrast
Input Format
Film Mode
HDMI Format
HDCP
Notification
Audio Format
Analog Gain/
Attenuation
Screen
Auto-Image
Saver/
Timeout
Contact
Mute/
Tally LED
Input
Output
Information
Information
Press the Enter or Right button to open submenu items.
Press the Up or Down button to navigate the submenu items.
Press the Menu button to exit a submenu item or return to the previous submenu.
Navigate to an adjustable item and press the Enter or Right button to select the
submenu item.
Press the Left or Right button to select a submenu item or a specific adjustable setting
within the selected submenu item.
If the selected submenu item has multiple adjustable settings, press the Up or Down
button to select a value.
Press the Enter button to accept the new value.
Press the Menu button to cancel any pending changes.
2,
on page 6) or the HDMI output connector on an
G
on page 6).
Submenu Items
Audio
Output
Aspect Ratio
Resolution
Color/Tint
Detail
Horizontal/
Horizontal/
Total Pixels/
Vertical Start
Vertical
Active
Output
Output
Format
Volume
Aspect Ratio
Auto Memory
HDCP Status
Display
Information
IN1604 DTP and IN1604 HD Scalers • Operation
Audio Mute
Test Pattern
HDCP
Phase
Authorization
Overscan
Auto Switch
Factory
Firmware
Version
EDID
Reset
14
Need help?
Do you have a question about the IN1604 DTP and is the answer not in the manual?