Audio Configuration Page - Extron electronics IN1604 DTP User Manual

Audio Configuration Page

From the Audio Config page, audio inputs and outputs can be configured and mixed. Click
the
Audio Config
open this page.
Figure 50.
1. From the
input format. The audio input format specifies whether the audio input is analog, digital,
or not to be sent to the output.
NOTE: Analog Input gain adjustment applies only to analog signals. The Input
Gain fader is available only when the audio format is set to
LPCM-2Ch Auto (Analog 1)
(Analog 2)
For input 1, available formats include:
• None
• Analog 1
This option sets "No Audio" EDID.
• Analog 2
output. This option sets "No Audio" EDID.
For all other inputs, available formats include:
•
None
• Analog 1
sets "No Audio" EDID.
• Analog 2
sets "No Audio" EDID.
• LPCM-2Ch
option sets 2Ch audio EDID.
• Multi-Ch
multi-channel audio is not available, 2-channel LPCM audio is passed to the digital
outputs. This option sets Multi-Ch audio EDID.
icon (see figure 38,
5
Audio Configuration Page
drop-down menu (see figure 50,
Audio Format
,
Multi-Ch Auto (Analog 1)
, or
Multi-Ch Auto (Analog 2)
— Audio is not sent to the output. This option sets "No Audio" EDID.
— Analog audio from analog audio input 1 (TRS) is sent to the output.
— Analog audio from analog audio input 2 (captive screw) is sent to the
— Audio is not sent to the output. This option sets "No Audio" EDID.
— Analog audio from analog input 1 is sent to the output. This option
— Analog audio from analog input 2 is sent to the output. This option
— The digital input is configured to receive 2-channel LPCM audio. This
— The digital input is configured to receive multi-channel audio. If
IN1604 DTP and IN1604 HD Scalers • Configuration Software
on page 58) on the Global Navigation Bar to
), select the desired audio
1
Analog 1
,
.
, ,
Analog 2
LPCM-2Ch Auto
68