Extron electronics IN1604 DTP User Manual page 50

Command
Auto switch mode
Disable auto switch mode
Prioritize highest active
input
Prioritize lowest active
input
View auto switch mode
Video switch effect
Cut
Fade through black
View setting
HDCP notification (displayed on non-HDCP displays with HDCP input selected)
Enable notification
Disable notification
Query notification
AV mute (from contact and tally pins)
Configure AV mute
View AV mute setting
NOTES:
X(
= Enable or disable
X3@
= Video switching effect
X3%
= Auto switch mode
X4^
= AV mute mode
X4&
= Mute LED mode
ASCII Command Response
(host to scaler) (scaler to host)
E }
0AUSW Ausw0
E }
1AUSW Ausw1
E }
2AUSW Ausw2
E } X3%]
AUSW
E }
0SWEF Swef0
E }
1SWEF Swef1
E } X3@]
SWEF
E }
N1HDCP HdcpN1
E }
N0HDCP HdcpN0
E } X(]
NHDCP
E X4^ X4& }
* MUTM Mutm
E } X4^
MUTM
= off or disabled
0
= on or enabled
1
= cut
0
= fade through black (default)
1
= disable (default)
0
= gives priority to the highest numbered active input
1
= gives priority to the lowest numbered active input
2
= normal operation
0
= perform video and audio mute
1
= perform video sync and audio mute
2
= always on
0
= off when muted
1
= blink when muted
2
IN1604 DTP and IN1604 HD Scalers • SIS Configuration and Control
Additional Description
Manual input switching only.
]
Automatically switches to the
]
highest numbered active input.
Automatically switches to the
]
lowest numbered active input.
View the current auto switch
mode.
] Set the switch effect to cut.
] Set the switch effect to fade
through black (default).
View the switch effect setting.
] Display a green screen.
] Mute output to black.
View the HDCP notification
setting.
Configure the operation of
X4^ X4&]
*
Contact In and Tally Out ports.
View the current status of
X4&]
*
Contact In and Tally Out port
configuration.
44