Cleanlock; Descaling; Insert / Change Water Filter - WMF 950 S User Manual

CleanLock

✻ Touch
CleanLock
A 15-second countdown starts.
The touch display can now be cleaned.
The touch display is activated again 15 seconds after
the last time it was touched.

Descaling

The water hardness, flow rate, and whether a water
filter is used are the factors that determine the number
of litres remaining before descaling is required.
Insert / change water filter
Water filter settings
Please select whether a water filter is to be installed
Water filter inserted
Water filter settings
150
Previous step
A water filter is necessary with a water hardness higher
than 5 °dKH to prevent damage to the coffee machine.
The water filter must be changed regularly.
✻ Insert the water filter
✻ Confirm that the water filter has been installed
Another window opens.
✻ Set filter capacity
After filter change there is an automatic program
sequence to rinse and bleed the anti-scale filter and
water system. Hot water runs out of the hot water
spout during this process.
Without water filter
✻ Set water hardness
User Manual WMF 950 S
DS_05_03_05
DS_05_03_06
DS_05_03_07
litres
Next step
Software | Care
CleanLock
Clean the display with a clean, damp
cloth. Do not use any cleaners or
implements.
Clean the operating panel
w Care
page 66
Descaling
Descaling
w Care
starting on page 64
Insert / change water filter
Follow the water filter instructions.
Displays lead step by step through
the program.
Follow the instructions.
Fitler capacity table
w Start-up program
page 26
43