Table of Contents
Advertisement
Operation
3.7 All-in-one spout
The all-in-one spout dispenses coffee and milk foam
simultaneously and it can be set steplessly so that you
can place anything from an espresso cup to a latte
macchiato glass beneath it.
The adjustment height ranges from 75-135 mm.
Adjusting the height
Hold the all-in-one spout between your thumb and
forefinger and press the right adjustment lever
towards the spout
Move the all-in-one spout to the desired height
Release the adjustment lever
Positions of the all-in-one spout
The uppermost position of the all-in-one spout is
reserved for the milk system rinse.
•
Uppermost position =
= milk system rinse (spout clicks into position)
•
Other positions =
= beverage dispensing (variable height)
If the all-in-one spout is still in the milk system rinse posi-
tion after a milk system rinse, the display reports:
lower spout
lower spout
into beverage position
into beverage position
Put the all-in-one spout in a beverage dispensing
position
As soon as the all-in-one spout is back in a beverage
dispensing position, the message disappears and the
readiness display appears.
22
WMF 1000 user manual
Advertisement
Table of Contents
