Chapter 2 Commissioning; Unpacking And Setting Up; Testing The Water Hardness; Preparing The Water Tank - WMF WMF1000 User Manual

Chapter 2 Commissioning

2.1 Unpacking and Setting up

Unpack coffee machine and set up on a stable, hori-
zontal support
Check the coffee machine for possible transport
damage
Plug the connector into a grounded outlet
Assemble bean hopper attachment
Insert drip tray and drip tray grid
2.2 Test the water hardness
Briefly dip carbon hardness test strip into water
(approx. 1 second)
One minute later, read the degree of hardness on the
colour scale of the test strip package
The water hardness is set during commissioning.
2.3 Prepare the water tank
Remove the water tank from the coffee machine
Remove all accessories from the water tank
Rinse the water tank thoroughly with tap water
Do not put the water tank back into the machine yet. The
milk hose must be assembled first.
Insert the WMF tank filter
The WMF tank filter ensures the best coffee quality and
protects the coffee machine against calcification.
With water hardness 0-4, do not use a tank filter.
Remove the screen built into the water tank
Place the cartridge adapter on the water spout
supports from above (lock pulled) and lock by
pressing the lock down
Unpack the tank filter cartridge and place on the
cartridge adapter
WMF 1000 user manual
[2]
[3]
Commissioning
Cable compartment
Keep the original packaging to
use for transport.
Please empty the water tank,
drip tray, filter sets and bean
hopper before transporting.
Fill water tank with drinking
water
[1]
See
Tank filter instructions
Figures see next page
11