DIGTA SCAN 404 BARCODE READER
Scanning a barcode for a new dictation
The Digta Scan must be connected to the portable dicta-
tion machine, enabled and configured for the barcodes
you are using.
•
Switch on the dictation machine.
•
Push the slide switch to »
•
Press the »new« button.
– »
« and »
•
If you do not want to scan a barcode into the dictation
accompanying note, press the »»
tinue with your dictation as usual.
•
If you want to scan a barcode, point the barcode reader
at the barcode as pictured and press the »
– The device now scans the code with a red laser
beam. The machine acknowledges the successful
reading of the code with a single signal tone, and the
laser beam shuts off.
– The scanned barcode appears in the display.
•
If you want to include the barcode as displayed in the
dictation, press the »
•
If you do not want to include the barcode in the dicta-
tion, press the »
tation as usual.
STOP
« appear in the display.
« button.
« button and continue with your dic-
«.
« button and con-
« button.
_____
93