Change Of Profile; Recording Of New Dictation; Select And Listen To A Dictation - Grundig Digta 7 Push Quick Reference Manual

Hide thumbs Also See for Digta 7 Push:
Table of Contents

Advertisement

Available languages

Available languages

operating
memory capacity. To allow you to use the majority of the settings
in the menu, switch to Menu mode under "Profiles".
En

change of profile

x Press "MENU".
x Use the up-down buttons to navigate to the "Profile" menu
item and confirm by pressing "OK".
A list of possible profiles appears on the display.
x Select the required profile by using the up-down buttons and
confirm it by pressing the "OK" button.

Recording of new dictation

x Please press the "NEW" button.
The dictation machine switches over to the recording pause
»ll«, the LED-indicator blinks red.
x Start the recording by clicking the »
new text.
The recording indicator lights red in the Overwrite recording
mode and shines orange in the Insert recording mode. The
progress bar increases as well as the dictation length.
x Pause the recording by clicking the »
28
g
« button. Dictate your
g
« button once again.
The dictation machine switches over to the recording pause
»ll«, the LED-indicator blinks red resp. orange.
x Continue the recording by clicking the »
on dictating your text.
x End the recording by clicking the »

Select and listen to a dictation

/
e
f
x Please press the »
« button again first if a recording or
play-back is running.
The device turns to recording stop.
x Select the desired dictation by using the up-down navigation
buttons.
/
e
f
x Press the »
« button again to listen to the dictation.
The progress bar on the display increases. The minutes and
seconds of the current dictation position shown on the
display increase.
x If play-back via OK is activated, you can start and pause the
play-back process by pressing the "OK" button.
x End the play-back by clicking the »
"OK".
g
« button again. Go
/
e
f
« button.
/
e
f
« button again or

Advertisement

Table of Contents
loading

Table of Contents