Direct Charging Of The Rechar - Grundig DIGTA 420 User Manual

Digital portable dictation machine
Hide thumbs Also See for DIGTA 420:
Table of Contents

Advertisement

PREPARATION
Note:
The dictation machine's operating system is "shut down"
(similar to a PC) when it is turned off. There must still be suf-
ficient power available for this purpose. If, after the dictation
machine has automatically turned off, you turn it back on again
without having plugged it into a power supply* (e.g. via USB
cable to a PC) or without having inserted new rechargeable
batteries, your saved dictations may be permanently lost.
The rechargeable battery* is charged also when the
dictation machine is switched on. In this case, however,
charging will take a longer time.
Direct charging of the rechargeable battery
Switch off the dictation machine by moving the On/Off
slide switch upwards to »OFF/HOLD«.
Plug the power supply* into the mains socket.
Connect the USB plug of the power supply* cable to
the »PC/USB« socket of the dictation machine.
– After a short time the display indicates that the batte-
ries are recharged and the green recording indicator
will be blinking.
– The flat rechargeable battery* will be fully recharged
after about 4 hours. The charging indicator and the
recording indicator then go out.
Pull the power supply* from the socket and the power
supply* cable's USB plug from the »PC/USB« socket.
Note:
When the rechargeable battery is flat (total discharge), it
may take up to two hours until the load indicator appears
on the display. Please check if the dictation machine and
the power supply work accurately. To do so, take out the
rechargeable battery. Then connect the dictation machine
with the mains supply and switch on the dication machine.
___________________________________
*
Special extras
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digtasonic 422Digtasonic 420

Table of Contents