Inserting And Removing Repla - Grundig DIGTA 420 User Manual

PREPARATION
Inserting and removing replaceable memory
cards
You can use memory cards (not included in delivery) instead
of the internal memory.
Use Digta Cards supplied as accessories by Grundig Business
Systems.
• Push the memory card into the slot with the side with
the diagonal corner facing the direction shown on the
back of the device.
Note:
Do not insert the card with force. Slight pressure is suf-
ficient.
To remove the card press the memory card slightly until
the snapping mechanism unlocks.
Do not remove the cards when recording is running or
during data transfer from PC to PC. This can result in
data loss.
If a full memory card (e.g. with over 300 dictations) is
inserted into the dictation machine with factory default
settings (or with a reset dictation counter), it takes up
to 20 seconds to create a new dictation. This time is
required for the dictation machine to search for the first
free dictation number starting from dictation number 1.
This time also varies depending on the manufacturer of
the memory card.
If you use MultiMediaCards/SecureDigital Cards (MMC/
SD) with insufficient writing speed, »Card not suppor-
ted!« will appear in the display.
Make sure that the electrical contacts on the undersi-
de of the memory card are not subjected to physical
stress. The cards are not affected by dirt or moisture,
but they may only be put into the dictation machine
when they are clean and dry.
___________________________________
15