Pc Microphone Operation, Usb Audio, Usb Hid - Grundig DIGTA 420 User Manual

COMMUNICATION wITH THE PC

PC microphone operation, USB Audio, USB HID

• Use the USB cable to connect the dictation machine to
the USB interface at the PC via the »PC/USB« socket.
• Move the On/Off switch to »ON« to switch on the dicta-
tion machine.
– Press the »
(the current settings are displayed on the right edge)
You can set the microphone sensitivity via »
chapter „The menu / Microphone sensitivity").
• Select a sound program on your PC now, e.g. a Grundig
Business Systems dictation software, a voice recogniti-
on system or the Windows audiorecorder.
• Start the recording in your sound program and speak
the message.
– The red LED at the dictation machine lights up, the
disc symbol is spinning.
• Press the »
the microphone.
– No signal is transferred to the recording software,
i.e. a voice recognition system no longer recognizes
any sounds. The red LED is blinking and the disc
symbol stops spinning.
If play-back is running on your sound program or voice
recognition program, the green light emitting diode lights
up and you will listen to the recordings from the speakers
of the Digta.
If you are using the dictation machine as PC microphone of
the Grundig Business Systems dictation software, the keys
and slide switch of the dictation machine are programmed
with functions of the dictation software (USB-HID).
« button to do the microphone settings
« button and hold on pressing it to mute
_____________
« (see
85