Setting The Digta Scan Barcode Reader - Grundig DIGTA 420 User Manual

DIGTA SCAN 404 BARCODE READER

Setting the Digta Scan barcode reader

• The Digta Scan must be inserted and latched into
the portable dictation machine (see also "Plugging in,
Unplugging").
– Only when the Digta Scan is plugged in are the
asso ciated menu items available on the dictation
machine.
• Switch on the dictation machine.
• Push the slide switch to »
• Press the »
• Use the navigation buttons »◄►« to select »
then press the » « button.
• Use the navigation buttons »◄►« to select »
– The »Programming« menu function appears in the
display.
Note:
» «, see also "Restoring the default settings".
• Scan in the programming code with the »
– The machine acknowledges the successful reading of
the code with a single signal tone.
– You can scan any number of programming codes
consecutively with the »
Note:
If the machine cannot read a code, it emits a double
signal and displays the message »Scan fails Repeat ?«.
Confirm the error message with »
• Once you have made all the settings, press the »
button to quit the menu.
STOP
« button.
« button.
«.
« and
«
« button.
«.
_____
«
100