Display Or Modify Data Set In - Grundig DIGTA 420 User Manual

MODIFy MENU
Display or modify data set in the dictation.
In the modify menu, additional data e.g. patient- or client data
can be assigned to each individual dictation by means of the
data set-function. The data can be assigned to the respective
dictation by means of a scanner when patient-numbers or folder
numbers are administered through barcodes in order to avoid
mismatches. See chapter „The Menu / Data list".
• Move the slide switch to »
• Select the desired dictation by means of the navigation
button »◄►« (see „select and listen to a dictation").
Press the left selection button »
M , to enter the modify menu.
ode
• Select from the display the data set function »
– A dictation which already includes data is highlighted
with the „ID" symbol. It is displayed on the right side
above the dictation time indicator.
• The symbols»
» « – Show or change data set of the dictation.
• Confirm with the right selection button
• Confirm the data set which shall be entered
__________________________________
« appear on the display.
in order to view further data of the data set.
- Firstly the ID can be viewed by means of
the left navigation button, and the individual
data by means of the right navigation
button.
in the active dictation by means of the right
selection button or press the »
you only like to read the data.
STOP «.
« in the M
« button, if
enu
«.
38