Connecting And Separating The Dictation Machine And The Pc; Usb Parallel Operation - Grundig DIGTA 420 User Manual

COMMUNICATION wITH THE PC
Connecting and separating the dictation machine
and the PC
• Use the USB cable to connect the switched off dictation
machine to the USB interface at the PC via the »PC/
USB« port.
– The dictation machine begins to charge the rechar-
geable batteries. The green LED is blinking!
• Move the On/Off switch to »ON« to switch on the dicta-
tion machine.
– Now you are prompted for the PIN.
warning:
Disconnect the USB interface via the task bar, as otherwi-
se the transfer may not be complete.
Note:
The Grundig Business Systems PC software can only
be connected to one dictation machine at a time. If you
connect a second dictation machine to the USB interface,
the PC will not detect it, i.e. Windows will only display one
removable disk drive.

USB parallel operation

PC file transfer
• Connect the dictation machine to the PC via the USB
interface.
– If the dictation machine is already switched on the
USB parallel operation mode »
matically. The computer identifies the device as
removable medium and as USB audio/HID device.
Now you can transfer data between PC and dictation machine.
• Select USB parallel operation »
"Auto connect" is switched off and confirm with the »
button (see chapter "USB connection automatic /
manual").
_____________
« sets up auto-
« in the main menu if
«
84