Mains Operation; Mains Operation Via Usb - Grundig DIGTA 420 User Manual

PREPARATION

Mains operation via USB

You can connect your dictation machine to your PC via a
USB cable (included in delivery).
• Switch on your PC.
• Switch on your dictation machine and connect it to the
PC via the USB cable. A display for rechargeable bat-
tery* operation appears on the upper right edge, or the
symbol »
batteries are fully charged.
• If automatic PC connection is switched on, the dictation
machine logs on at the PC via USB parallel operation.
Open the menu with the right selection button. Select
the symbol » « for dictations in PC power supply*
mode with the navigation buttons and confirm with the
right selection button »
Now your dictation machine is supplied with power by the
PC (the battery* in the device is not discharged) and you
can use it for recordings and play-back like under battery
operation.

Mains operation

If the dictation machine has been switched on and a power
supply* is connected to the »PC/USB« socket, the power
supply* will supply the dictation machine with power. The
rechargeable battery* is charged.
– Display for mains operation »
Please use the Digta Station* for PC operation with power
supply*.
___________________________________
« for power supply* via PC flashes if the
«.
«.
*
Special extras
14