System Toolbox; User Management; User Code Setup; Adding A User Code - 2gig Technologies GO!CONTROL User Manual

SYSTEM TOOLBOX

USER MANAGEMENT

The system installer has programmed a
Master User Code for your system. This code
can be used to control the system, as well as
assign and change the other 31 User Codes
and User Code access options. The Master
User Code can also access several system
setup settings in the Toolbox.
NOTE: The other 31 User Codes are
restricted from accessing settings in the
Toolbox.

User Code Setup

IMPORTANT: Only the person with the
Master User Code can add or change the
other User Codes.
To setup the User Codes, do the following:
From the Home Screen, press Security.
1
From the Security Screen, press Menu.
2
From the Menu Screen, press Toolbox.
3
Enter the Master User Code (the factory
4
default setting is 1111).
On the Toolbox Screen (1 of 3), press
5
User Management.
The Users Management Screen displays
6
3 users at a me. Use the ↓ and ↑
arrows to scroll through the list.

ADDING A USER CODE

IMPORTANT: User Codes 0000 and 0001 are
not permitted.
Press one of the Add User buttons.
7
Enter a four‐digit code for the new User
8
Code and press Ok.
Enter the Code again to confirm the code
9
and press Ok.
A confirmation screen appears. Press Ok.
10
User Code Validity
After the Confirmation Screen Appears and
you click Ok, the User Codes Access Option
Screen appears. The three options
determine when the User Code that you just
entered is valid. Select one of the three
options:
• Always
• Never
• By Schedule
• Select Always to set this User Code
to always be valid. Press Back.
• Select Never to set this User Code to
never be valid. Press Back.
• Select By Schedule to set this User
Code to be valid only for selected
days and/or times.

User Code Access Schedules

You can setup User Codes with one or more
Access Schedules. Access Schedules limit
access to your system to people with User
Codes such as maintenance personnel,
service, or cleaning personnel.
Adding or Editing User Access
Schedules
If you selected By Schedule for the User
1
Code, the Edit Schedules button
appears.
To select or edit an existing User Code
2
Access Schedule, press Edit Schedules.
©2013 2GIG Technologies Inc. All Rights Reserved. 27