System Overview - 2gig Technologies Go!Control 2GIG-CNTRL2 Installation & Programming Instructions

The system's Control Panel features a color touch screen display that
allows control of all system functions and programming. The display
clearly shows the installer and subscriber system and installation
status. The helpful scrolling text, along with the voice prompts
that the Control Panel sounds, make installation, programming,
and operation very easy compared to keypad-programmed and
operated security systems of the past.
The system supports 48 wireless sensors of various types, two
hardwire loops, 15 sensor response types, a supervised bell output,
and a programmable solid-state control output. An on-board digital
communicator reports alarms and trouble to a central monitoring
station receiver via the standard telephone network. The Control
Panel also supports 2-way voice communications with the Central
Station.
An internal 345 MHz narrow-band radio receiver detects signals
from wireless system sensors. The high-gain receiver allows for
easy placement of the wireless sensors so signals can be received
in even the toughest of installation environments.
When the optional Model 2GIG-XCVR2 900 MHz transceiver is
installed, it sends and receives signals with accessory wireless
touch screen keypads. Touch screen keypads allow remote control
of the system through the same graphic interface design as the
Control Panel.
For enhanced operation, an optional Model 2GIG-GSMx global
system for mobile communications module (GSM radio modem)
can be installed in the fi eld. With the optional GSM radio modem
installed, the system will have wireless Central Station reporting
capability. 2-way voice communication with the Central Station can
also go "over-the-air" through the GSM radio modem.
Hardwire
Hardwire
Loop
Loop
#1
#2
Existing
Sensor
Installation
PIR
Door / Motion
Window Sensors
Sensors
Glass
Break
Sensors
CO
Sensors
Smoke
Sensors
Panic Fobs
Buttons
Up to 48 Wireless Sensors per System
Touch Screen
Color Display
Subscriber
Home &
Emergency
Buttons
Speaker
Color LCD
&
Display with
Microphone
Touch Screen
CONTROL PANEL
Standard 345 MHz Receiver
or Optional
345 MHz / 900 MHz Transceiver
Wireless
Key
Touch
Wireless
Screens
Keypads
Figure 3. System Block Diagram
The optional GSM radio modem also allows 2-way communications
with the Alarm.com server. Through this server, subscribers can
query and control their system using a computer browser from
anywhere in the world. The Alarm.com server can also send
messages, time corrections, and software updates to the Control
Panel. Special messages from the server are displayed to the
subscriber on the Control Panel's color touch screen.
For home control, the Control Panel's built-in Z-Wave radio module
allows controlling and monitoring various home automation devices
such as lighting, locks, heating, and air conditioning. The Z-Wave
radio module can also activate Z-Wave remote alarm sirens.
32 User Codes including a Duress Code are supported. User "one"
is the Master User Code that can add or delete the other 31 User
Codes. The Installer Code must be unique from any other User
Code and is the only code that has access to system programming.
The front panel
indicators. Pressing the
display for Panic, Fire, and Emergency alarm activation (each has
programmable options and can be enabled or disabled). Pressing
the button changes the system display to the Home Screen.
Subscriber's
Computer
Optional
GSM
Module
C P U
Bell System
Output Power
Power
Supply
Piezo
Siren
120 VAC
Input
Power

System Overview

and buttons serve as controls as well as
button displays emergency icons on the
Subscriber's
PDA
Central Station
Public
Receiver
Switched
Telephone
Network
GSM
Telephone
Network
Alarm.com
Server
Alarm.com
Infrastructure
Z-Wave
Radio
Remote
Sirens
Cell
Site
Alarm.com
Web site
Database
Thermostat
Lighting
Control
Door
Locks
3