Rf Sensor Summary Screen - 2gig Technologies Go!Control 2GIG-CNTRL2 Installation & Programming Instructions

RF SENSOR PROGRAMMING (Q-1) OUTLINE
STEP DOWN
THROUGH OPTIONS
SELECT RF SENSOR #
PRESS FOR NEXT OPTION
SELECT RF
SENSOR TYPE
PRESS FOR NEXT OPTION
SELECT RF SENSOR
EQUIPMENT TYPE
(ONLY FOR SOME SENSOR TYPES)
PRESS FOR NEXT OPTION
SELECT RF SENSOR
EQUIPMENT CODE
PRESS FOR NEXT OPTION
ENTER RF SENSOR
OTHER EQUIPMENT CODE
(ONLY FOR "OTHER" EQUIPMENT)
PRESS FOR NEXT OPTION
ENTER RF SENSOR
SERIAL NUMBER
PRESS FOR NEXT OPTION
SELECT RF SENSOR
EQUIPMENT AGE
PRESS FOR NEXT OPTION
SELECT RF SENSOR
LOOP NUMBER
PRESS FOR NEXT OPTION
SELECT RF SENSOR
DIALER DELAY
PRESS FOR NEXT OPTION
CONSTRUCT RF SENSOR
VOICE DESCRIPTOR
PRESS FOR NEXT OPTION
SELECT RF SENSOR
REPORTS
PRESS FOR NEXT OPTION
SELECT RF SENSOR
SUPERVISED
PRESS FOR NEXT OPTION
SELECT RF SENSOR
CHIME
PRESS TO FINISH FOR THIS SENSOR, THEN
Figure 49. RF Sensor Programming Outline
SELECT OPTION WITH
THESE KEYS
ENTER ON KEYPAD OR PRESS
OR
TO SELECT FROM LIST
OR PRESS SKIP TO JUMP TO Q-2
ENTER ON KEYPAD OR PRESS
OR
TO SELECT FROM LIST
ENTER ON KEYPAD OR PRESS
OR
TO SELECT FROM LIST
ENTER ON KEYPAD OR PRESS
OR
TO SELECT FROM LIST
ENTER ON KEYPAD
ENTER ON KEYPAD OR PRESS
shift THEN learn
AND SEND SIGNAL FROM SENSOR
ENTER ON KEYPAD OR PRESS
OR
TO SELECT FROM LIST
ENTER ON KEYPAD OR PRESS
OR
TO SELECT FROM LIST
ENTER ON KEYPAD OR PRESS
OR
TO SELECT FROM LIST
insert
PRESS FOR EACH WORD
ENTER ON KEYPAD OR PRESS
OR
TO SELECT FROM LIST
ENTER ON KEYPAD OR PRESS
OR
TO SELECT FROM LIST
ENTER ON KEYPAD OR PRESS
OR
TO SELECT FROM LIST
ENTER ON KEYPAD OR PRESS
OR
TO SELECT FROM LIST
edit
FOR NEXT SENSOR, OR skip FOR Q2
next
Installer Programming

RF Sensor Summary Screen

After setting all the options for a sensor, the RF sensor summary
screen is displayed. The screen can also be displayed for
programmed sensors during RF sensor program editing by
pressing the SUM button.
• The ← and → arrow buttons step through the RF sensor numbers.
• The EDIT CURRENT and EDIT NEXT buttons return to sensor
programming.
• Pressing SKIP goes to question number Q-2 (wired sensor programming).
Figure 50. RF Sensor Summary Screen
21