Cisco Telepresence Remote Control - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction

Cisco TelePresence Remote Control

Microphone: Press the key to toggle the microphones on/off.
+ –
Volume: Press plus ( ) or minus ( ) on the volume key to adjust
-
Mute the ringtone: Press minus ( ) on the volume key to mute the
ringtone on an incoming call.
OK/Select: Press the key to confirm your choice or selection.
Phone book: Press the key to display the local Phone book.
Home: Press the key to key to show the menu on screen.
INITIATE A CALL: Select a name from the Phone book or enter the
name, number or URI and press the Call key to initiate the call.
SHORTCUT TO RECENT CALLS: Use the Call key as a shortcut to
Recent Calls when the Call menu is not visible.
Clear: Press the key to remove characters in a text field.
Grab the remote control and make sure your hand
touches the rubber line sensors going along both
sides of the remote control.
or: Press any key on the remote control.
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API
Function keys:
functions. Each key reflects a soft key on screen.
the volume.
Call: Using the key:
Waking up the system
xConfiguration xCommand
Represents shortcuts and advanced
180
xStatus
Presentation: Press the key to show/hide a presentation.
Zoom: Press the + or – on the key to zoom the camera in
and out.
Arrows:
• Up/Down: Use the and arrow keys to navigate in the
menu.
• Arrow Right: Press the arrow key to expand the selected
menu item or to move to the right in a text field.
• Arrow Left: Press the arrow key to go one step back in
the menu or to move to the left in a text field.
Layout: Press the key to display the Layout menu, then
select a view in the menu.
End call/Standby: Press the key to end a call, or when
idle, press and hold the key to go into standby mode.
Alphanumeric keypad: Use the keypad in the same way as you
would use a cellular phone.
• 0-9, a-z, period (.), @, space, *: Press a key repeatedly to
toggle between the options displayed on each key.
• abc/123 #: Press the # key to toggle between touch tones
mode (long press), lower case characters and numbers.
IR transmitter range (DIP switch setting)
The IR transmitter has a short and long range. Open the battery
cover and remove the batteries to set the DIP switch.
• Short range (1 m): Move the DIP switch down.
• Longer range: Move the DIP switch up.
Copyright © 2013 Cisco Systems, Inc. All rights reserved.
API Reference Guide
Appendices Appendices