Table of Contents
Advertisement
Online Menu Operation
When the drive is Online, the menus shown in
Press Menu to advance to the View Configuration menu.
• View the drive configuration.
• View the TCP/IP configuration (N/A for the T9840A).
The online (view) TCP/IP menu is presented
• View the drive firmware level.
• View the ASIC firmware level (FICON drives only).
• View the CSL firmware level.
View Configuration Menu
The View Configuration menu is presented in more detail in the following sections:
•
"Fibre Channel View Configuration Menu Tree (T9840A/B/C)" on page 47
•
"Fibre Channel View Configuration Menu Tree (T9840D)" on page 48
•
"SCSI View Configuration Menu Tree" on page 49
•
"ESCON View Configuration Menu Tree" on page 50
•
"FICON View Configuration Menu Tree (T9840B/C)" on page 51
•
"FICON View Configuration Menu Tree (T9840D)" on page 53
The basic format is a text-based representation of the menu structure with indention
levels to indicate second and third levels (submenus). There is also a listing of
options and other pertinent information.
December 2012
Note – Individual submenu items in the illustration are based 1on
the T9840A/B/C drives using a code level lower than 1.42.x07.
The content of the figure was created before the T9840D tape drive was
available. The note on the TCP/IP menu does not apply to the T9840D drive
because the drive Ethernet port can be used with the Crypto Key
Management System 2.0.
Note – Code level 1.42.x07 was used as the basis for documenting
the View Configuration menu. Specific menu item order and
options might differ if your drive is using a different code level.
Online Menu Operation
FIGURE 3-2 on page 46
on page
54.
are available.
Menus 45
Advertisement
Table of Contents
