Oracle StorageTek T9840 User Manual page 51

FICON View Configuration Menu Tree (T9840B/C)
Use the online view configuration menu tree as a brief guide.
Online/Offline [Press Select to toggle; then press Menu to set.]
View CFG ? (View Configuration) [Press Select to enter or press Menu to bypass.]
Intf FICON
View PrtA? (view current port attributes)
A=xxxxxxay (24-bit address identifier, connection type, and port speed - when port log in is
complete)
B=xxxxxxay (when viewing port B)
SFP module parameters {2G MM0300m/2G SM10.0k}
Hard PA x {Y/N} (Physical Address)
PA=xx,ddd (PA=hex, decimal index) (only when Hard PA is yes)
Soft PA XX {HI/LO} (only when Hard PA is no)
Rate xxxx {Auto/fixed rate - 2Gb or 1Gb} (interface speed negotiation)
MaxSz xxxx {2112/2048} (maximum data frame size)
H=xxxxxxxx (first half, 64-bit port node world-wide-name)
L=xxxxxxxx (second half, 64-bit port node world-wide-name)
WWN Custom (only when custom or dynamic WWN is set)
View PrtB? (current port B attributes) (same sub-menus as port A)
Emul xxxxx {3490/3590/*/*/*/*} (displays current emulation mode)
(*=special modes, used only when directed by Engineering or Tech Support)
Cmprss Xxx {Yes/Off/No} (compression mode)
Full DSE x {Y/N} (data security erase mode)
Drv Adr xy (2-character hexidecimal logical drive address - usually 00)
SL Prot x {Y/N} (standard label protection mode)
English/Espanol/Francais/Italiano/Deutsch (current language)
Tape Bar x {Y/N} (tape completion indication)
VolSafe x {Y/N} (enable VolSafe - write once read many)
Full Code x {Y/N} (drive memory contains full code load)
CSL Xxxxxx {Y/N} (CSL operating mode - System/Auto/Manual)
98x Yyyyyy {x/c} {Normal/Emul} (ID the drive as high-density during an MVS swap)
[x=T9840B only in 3590 emulation modes]
Lib Adr xy {FF/00-13} (2-character hexidecimal library address) manufacturing setting is
FF and it must be changed to a valid drive address when installed in a 9310 library.
December 2012
Online Menu Operation
Menus 51