Oracle StorageTek T9840 User Manual page 47

Fibre Channel View Configuration Menu Tree (T9840A/B/C)
Use the online view configuration menu tree as a brief guide.
Online/Offline [Press Select to toggle; then press Menu to set.]
Port X YYY {A/B and ENA/DIS}
View CFG ? (View Configuration) {Press Select to enter, press Menu to bypass.]
Cmprss xxx {Yes/Off/No} (compression mode)
Full DSE x {Y/N} (data security erase mode)
SL Prot x {Y/N} (standard label protection mode)
View PrtA? (view current port attributes)
Hard PA xx {Y/N} (Physical Address)
PA=xx,ddd {PA=hex, decimal index} (valid only when Hard PA is yes)
Soft PA xx {HI/LO} (only when Hard PA is no)
MaxSz xxxx {2112/2048/1280/1024/768} (maximum data frame size)
A_I=xxxxxx (24-bit address ID - when port login is complete)
H=xxxxxxxx (first half, 64-bit port node world-wide-name)
L=xxxxxxxx (second half, 64-bit port node world-wide-name)
WWN Custom (only when custom or dynamic WWN is set)
View PrtB? (current port B attributes) (same sub-menus as port A)
Tape Bar x {Y/N} (tape completion indication)
English/Espanol/Francais/Italiano/Deutsch (current language)
VolSafe X {Y/N} (determines the VolSafe capability of the drive)
FullCode X {Y/N} (determines whether a full code image is in drive memory)
Emul xxxxx {STD/3590/*/*/3490E/*/*/*/*/*/*/*/*/*} (displays the active emulation mode)
(*=special modes, used only when directed by Engineering or Tech Support)
Lib Adr xy {FF/00-13} (2-character hexidecimal library address) manufacturing setting is
FF and it must be changed to a valid drive address when installed in a 9310 library.
CSL Xxxxxx {System/Auto/Manual} (CSL power up mode)
H=xxxxxxxx (first half, 64-bit drive node world-wide-name)
L=xxxxxxxx (second half, 64-bit drive node world-wide-name)
WWN Custom (only when custom/dynamic WWN is set)
S/N=xxxxxx {drive serial number} (last six-characters of drive DMOD)
Exit CFG ? (exit view configuration) [Press Select to exit or press Menu to return to the View
CFG ? submenu.]
December 2012
Online Menu Operation
Menus 47