Table of Contents
Advertisement
TABLE 5-2 Operator Panel Display Messages (Continued)
Display
CodUpFail1
The tape drive cannot read the data cartridge
tape, or the tape drive cannot position the
data cartridge tape.
CodUpFail2
The EEPROM failed.
CodUpFail3
The tape drive cannot read code from the
data cartridge tape.
CodUpFail4
The data cartridge tape is not a code update
cartridge tape.
DatCrFail1
The tape drive cannot create (reformat or
reclaim) a cartridge tape.
The tape drive cannot create (reformat or
DmpCrFail1
reclaim) a diagnostic dump tape.
DmpCrFail2
The tape drive cannot read the format of the
data cartridge tape.
DmpWrFail1
The tape drive cannot write diagnostic data
onto the data cartridge tape, or the tape drive
cannot position the data cartridge tape.
DmpWrFail2
There is no diagnostic dump data to process. Contact authorized service
xxxx:Dmp y
Alternates with * (an asterisk) after
completion of IPL, where xxxx=the FSC of
last dump data collected and Y=number of
uncollected dumps in non-volatile memory.
DumpAgain?
The tape drive detected the same error within
alternating
a minute.
with CHK
Note: The Service indicator is flashing.
xxxx, where
xxxx is an FSC.
The dump or event log is being transferred to
DumpToHost
the host; operator panel switches are locked.
Exp ClCart
The cleaning cartridge is used up.
Fix CfgErr
The checksum does not match after an IPL.
December 2012
Meaning
Recommended Action
Try another cartridge tape.
Contact authorized service
personnel.
Retry the operation, or try another
cartridge tape. If the problem
persists, contact authorized service
personnel.
Try another code update cartridge
tape. If the problem persists, place a
service call.
Ensure that the data cartridge tape is
write-enabled, or try to reformat the
tape on another drive. If the problem
persists, place a service call.
Ensure that the data cartridge tape is
write-enabled. If the problem
persists, place a service call.
Retry the operation, or try another
cartridge tape. If the problem
persists, place a service call.
Contact authorized service
personnel.
personnel.
Contact authorized service personnel
who accesses the diagnostic data and
collects it to tape or to the host.
IPL the tape drive. If the problem
persists, contact authorized service
personnel.
None
Replace the cleaning cartridge.
Contact authorized service
personnel.
Indicators and Messages 73
Messages
Advertisement
Table of Contents
