Table of Contents
Advertisement
Menu Structure Overview
• Press Menu (No) to bypass and advance to the next menu.
• Press Select (Yes) to enter the submenus.
When you press the Menu switch on the operator panel, the first menu provides
selection of Online (default) or Offline menus.
• Press the Select switch to toggle between online mode and offline mode as
desired, then press the Menu switch to advance to the second menu item.
View/Change Configuration menus display drive configuration settings (view only)
when online, or allow drive configuration changes when offline. Press Menu to
advance the display to the next menu. Press Select to enter the submenu.
View/Change TCP Configuration menus display the drive Transmission Control
Protocol /Internet Protocol (TCP/IP) configuration settings (view only) when online,
or allow TCP/IP configuration changes when offline. Press Menu to advance the
display to the next menu. Press Select to enter the submenu.
Drive Operations menus (offline only) provide drive utilities. Press Menu to advance
the display to the next menu. Press Select to enter the submenu.
The Drive Firmware menu (view only) displays the current drive firmware release
level.
The Exit Menu allows you the choice to either return to the Online/Offline selection
menu or to exit the menu system. The last character in the Exit menu is a ? that
signifies that you must make a choice. Press Select to exit the menu or press Menu to
repeat the main menu.
FIGURE 3-1 Menu System Overview
44 T9840 URM
Note – If you press the Menu switch again, you will bypass the
second menu item and advance to the third menu item.
Note – The Virtual Operator Panel application provides the
capability to view the configuration settings of a T9840D tape
drive. You might prefer to use this method instead of the physical
drive panel. See the Virtual Operator Panel User's Guide for
pertinent information.
December 2012
Advertisement
Table of Contents
