Table of Contents
Advertisement
Online Menu Operation
H=xxxxxxxx (first half, 64-bit drive node world-wide-name)
L=xxxxxxxx (second half, 64-bit drive node world-wide-name)
WWN Custom (only when custom/dynamic WWN is set)
S/N=xxxxxx (drive serial number) (last six-characters of drive DMOD)
Exit CFG ? (exit view configuration) [Press Select to exit or press Menu to return to the
View CFG? submenu.]
TCP/IP View Configuration Menu
Use the following menu tree as a brief guide to view the TCP/IP settings of the
T9840D tape drive.
Online/Offline [Press Select to toggle, then press Menu to set.]
View CFG ? [Press Menu to bypass.]
View TCP ? [Press Select to enter or press Menu to bypass.]
DHCP x {Y/N} (must be set to "N" to view/change the static settings)
IPhaaa.bbb {IP Address, high} (first half of static IP address)
IPlccc.ddd {IP Address, low} (second half of static IP address)
NMhaaa.bbb {Net Mask, high} (first half of sub-net mask)
NMlccc.ddd {Net Mask, low} (second half of sub-net mask)
GWhaaa.bbb {Gateway, high} (first half of gateway address)
GWlccc.ddd {Gateway, low} (second half of gateway address)
Exit TCP ? [Press Select to exit or press Menu to return to the View TCP ? submenu.]
54 T9840 URM
December 2012
Advertisement
Table of Contents
