Table of Contents
Advertisement
The menu system provides the operator and service representative a means to
determine drive configuration settings, access drive utilities, and display the drive
firmware level at the drive operator panel. The menu system consists of information
or values, submenus, and options that appear in the display section of the operator
panel (see
the Menu and Select switches on the operator panel (see
The menu system information and guidelines are provided in the following order:
1.
"Menu Structure Overview"
2. "Online Menu Operation"
3.
"Offline Menus"
Menu Structure Overview
The drive has two main menus:
• When the drive is online, you will use the main menu primarily for viewing the
drive configuration settings.
• When the drive is offline, you will use the main menu primarily for changing the
drive configuration settings or for performing drive operations.
FIGURE 3-1 on page 44
the main menu system. The left column shows the first item in the menu while the
right column shows the last item in the menu system.
The drive is available with several data path interfaces. The main menu items do
have some variation based upon the particular interface, and those variations are
presented in later sections of this chapter.
Although the illustration menu titles contain full words, the actual presentation on
the display is an abbreviation because the display is limited to ten characters. The
Configuration, TCP/IP, and Drive main menu items contain a ? as the last character
in the display. The ? signifies that a submenu is available.
Use the Menu and Select switches to navigate through the menu system.
December 2012
"Display" on page
34). You navigate through the menu system by pressing
is a high-level depiction of the common elements comprising
Note – The Port Enable/Disable item does not appear as a main
menu item for all drive interfaces.
Menus
"Switches" on page
34).
Menus 43
3
Advertisement
Table of Contents
