Figure 1-6 Ac Wiring Diagram With An Inverter Subpanel - Xantrex Freedom HF 1000 Installation Manual

FreedomHF_IC_01-Installation.fm Page 22 Monday, December 24, 2007 9:47 AM
CAUTION: Equipment damage
Do NOT connect the AC OUT Neutral and Line
to the AC IN Neutral and Line.

Figure 1-6 AC Wiring Diagram with an Inverter Subpanel

In this wiring diagram, the AC input to the
main AC panel which contains the input circuit breaker. The AC output
wiring is routed to a separate inverter subpanel with a dedicated circuit
breaker.
Important:
bonded, a bonding jumper must be installed between the neutral and ground at
the generator's output or at the generator side of the transfer switch.
Also, both the main AC panel and the inverter subpanel must not have a
permanent neutral to ground bonds installed.
1–22
See Important note below.
The generator must have its neutral bonded to ground. If it is not
This guide for use by qualified installers only
See Important
note below.
See Important
note below.
Freedom HF comes from the
975-0395-01-01