Xantrex Freedom HF 1000 Installation Manual page 8

Freedom HF Install Guide.book Page vi Friday, December 21, 2007 9:57 PM
6. Do not disassemble the
7. To reduce the risk of electrical shock, disconnect both AC and DC
8. The
WARNING: Explosion hazard
1. W
2. This equipment contains components which tend to produce arcs or
3. To reduce the risk of battery explosion, follow these instructions and
vi
Freedom
parts. See Warranty for instructions on obtaining service. Attempting
to service the Freedom HF
shock or fire and will void your warranty. Internal capacitors remain
charged after all power is disconnected.
power from the Freedom HF
cleaning or working on any circuits connected to the
Turning off controls will not reduce this risk.
Freedom HF must be provided with an equipment-grounding
conductor connected to the AC input ground.
ORKING IN THE VICINITY OF BATTERIES IS DANGEROUS
GENERATE EXPLOSIVE GASES DURING NORMAL OPERATION
T ,
HEREFORE IT IS OF UTMOST IMPORTANCE THAT EACH TIME BEFORE
SERVICING THE UNIT IN THE VICINITY OF THE BATTERY
READ THIS MANUAL AND FOLLOW THE INSTRUCTIONS EXACTLY
sparks. To prevent fire or explosion, do not install the
compartments containing batteries or flammable materials, or in
locations that require ignition-protected equipment. This includes any
space containing gasoline-powered machinery, fuel tanks, as well as
joints, fittings, or other connections between components of the fuel
system.
those published by the battery manufacturer and the manufacturer of
any unit you intend to use in the vicinity of the battery.
This guide for use by qualified installers only
HF. It contains no user-serviceable
yourself may result in a risk of electrical
before attempting any maintenance or
Freedom HF.
. B
ATTERIES
.
,
THAT YOU
.
Freedom HF in
975-0395-01-01