Table of Contents
Advertisement
FreedomHF_IC_01-Installation.fm Page 3 Monday, December 24, 2007 9:47 AM
Safety Instructions
Installation Codes
975-0395-01-01
WARNING: Shock hazard
Xantrex Technology recommends that all wiring be done by a certified technician
or electrician to ensure adherence to the applicable electrical safety wiring
regulations.
•
Before you begin the installation, review the
Instructions" on page
you can plan your installation from beginning to end.
•
Disconnect all AC and DC power sources to prevent accidental
shock. Disable and secure all AC and DC disconnect devices and
automatic generator starting devices.
Governing installation codes vary depending on the specific location and
application of the installation. Some examples include the following:
•
The U.S. National Electrical Code (NEC)
•
The Canadian Electrical Code (CEC)
•
The U.S. Code of Federal Regulations (CFRs)
•
Canadian Standards Association (CSA) and the RV Industry
Association (RVIA) for installations in RVs
•
The American Boating and Yachting Committee (ABYC) for Marine
installations in the U.S.
It is the installer's responsibility to ensure that all applicable installation
requirements are met.
This guide for use by qualified installers only
"Important Safety
v, and read this entire
"Installation"
Safety Instructions
section so
1–3
Hide quick links:
Advertisement
Table of Contents
