Table of Contents
Advertisement
FreedomHF_IC_01-Installation.fm Page 12 Monday, December 24, 2007 9:47 AM
Step 2: Choosing a Location for the
WARNING: Fire and explosion hazard
This equipment contains components that tend to produce arcs or sparks. To
prevent fire or explosion, do not install the
containing batteries or flammable materials, or in locations that require ignition-
protected equipment. This includes any space containing gasoline-powered
machinery, fuel tanks, or joints, fittings, or other connections between
components of the fuel system.
WARNING: Fire hazard
To reduce the risk of fire, do not cover or obstruct the ventilation openings. Do
not install the
result.
The
following requirements:
❐ Dry. Do not allow water or other fluids to drip or splash on the
❐ Cool. Normal air temperature should be between 32 °F and 104 °F
❐ Ventilated. Allow at least 5 in. (13cm) of clearance at the DC end of
❐ Safe. Do not install the
❐ Close to the battery compartment and the AC source and load
❐ Protected from battery acid and gases. Never allow battery acid to
1–12
Freedom HF
Freedom HF
in a zero-clearance compartment. Overheating may
Freedom HF
should only be installed in locations that meet the
Freedom
HF. Do not mount the
splashing water or bilge water.
(0 °C and 40 °C)—the cooler the better.
the
Freedom HF
for air flow, 1 in. (2.5cm) on each side, and 2 in.
(5cm) at the AC end. The more clearance for ventilation around the
unit, the better the performance. Do not allow the ventilation
openings on the ends of the unit to become obstructed.
Freedom HF
batteries or in any compartment capable of storing flammable liquids
like gasoline.
panels. Avoid excessive cable lengths (which reduce input and output
power due to wire resistance). Use the recommended cable lengths
and sizes, especially between the battery banks and the
drip on the
Freedom HF
or its wiring when reading specific gravity or
filling the battery. Also do not mount the unit where it will be
exposed to gases produced by the batteries. These gases are very
corrosive, and prolonged exposure will damage the
This guide for use by qualified installers only
Freedom HF
in compartments
Freedom HF
in an area subject to
in the same compartment as
Freedom
Freedom
975-0395-01-01
HF.
HF.
Hide quick links:
Advertisement
Table of Contents
